Download Image
PE1008$115.00 Unit: 1

250KG TRANSMISSION ADAPTOR

More info
PE1008 – Transmission Adaptor
Conveniently turns a floor jack into a transmission jack.

• 250kg (550lb) Capacity.
• Suits most Trolley Jacks with 1-5/32" (29mm) removable saddle.
• 2-Way Tilt (forward 60º & back 10º).
• Includes Safety Chain.
• Net Weight – 9.6kg.

*12 Month Limited Warranty against faulty materials and manufacture defects only*
Download Image
PE1100$129.00 Unit: 1

500KG ADJUSTABLE GEARBOX SUPPORT

More info
PE1100 - Adjustable Gearbox Support
Designed to safely support gearboxes on removal and installation. Suitable for any trolley or transmission jack with 30mm diameter shaft.

• Maximum Capacity - 500kg.
• 2-Way Tilt (forward 60º & back 10º).
• Includes Safety Chain.
• Net Weight – 10kg.

*12 Month Limited Warranty against faulty materials and manufacture defects only*
Download Image
PE1101$99.00 Unit: 1

ADJUSTABLE DRAIN PAN HOLDER

More info
PE1101 - Adjustable Drain Pan Holder
Adjustable width jaws, converting a transmission jack with 30mm dia. shaft, into an oil drainer for pit or under hoist use. Strong and sturdy metal construction.

• Overall Size: 570 x 570 x 120mm
• Net Weight: 6.5kg

*12 Month Limited Warranty against faulty materials and manufacture defects only*
Download Image
PE2003$999.01 Unit: 1

20000KG AIR HYDRAULIC SERVICE JACK (AS/NZS)

More info
PE2003 – 20T Air Hydraulic Service Jack
Designed and built to withstand every day use in Heavy Duty applications, including roadside service, fleet maintenance, off road vehicle service and much more.

• 20000kg Safe Working Capacity
• Complete with 4 Inter-changeable Saddles
• Hydraulic Lift – 235mm
• Adjustable Height – 80mm
• Minimum Height – 210mm
• Maximum Height – 525mm
• Air Pressure – 0.7-1.0MPa (100-145psi)
• Net Weight – 47kg

Note: Use Hydraulic Fluid ISO68 or similar.

*12 Month Limited Warranty against faulty materials and manufacture defects only*
Download Image
PE2019$465.26 Unit: 1

3.5T LOW PROFILE H/D TROLLEY JACK (ANSI)

110 to 510mm

More info
PE2019 – Heavy Duty Garage Trolley Jack
Designed for Heavy Duty Trade Workshop use with low-long chassis design for stability.

• 3.5T Safe Working Capacity (ANSI).
• Professional Quality.
• Twin Pump Quick Lift.
• Positive Action Uni-Joint Release Valve.
• Minimum Height: 110mm.
• Maximum Height: 510mm.
• Net Weight: 47kg.

WARNING:
THIS JACK MUST BE USED ONLY ON HARD LEVEL SURFACES AND BE FREE TO ROLL DURING LIFTING AND LOWERING.
DO NOT GET UNDER A VEHICLE SUPPORTED BY A TROLLEY JACK – ALWAYS USE SUPPORT STANDS.

Approved to ANSI Standard: ASME PALD-2009

*12 Month Limited Warranty against faulty materials and manufacture defects only*
Download Image
PE2023$448.99 Unit: 1

3.0T SUPER LOW PROFILE H/D TROLLEY JACK (ANSI)

76 to 500mm | Quick Lift Dual Pump | All steel construction

More info
PE2023 – 3.0T Low Profile Heavy Duty Garage Trolley Jack
**IDEAL FOR LOWERED PERFORMANCE VEHICLES**

3.0Ton Professional Series Low Profile Floor Jack with Speedy Lift. Dual-pump design for a quick and hassle-free lift on most low performace vehicles and race cars, with soft rubber handle protector. Rear swivel castor wheels offer easy positioning under cars, trucks and SUVs.

• 3.0T Safe Working Capacity (ANSI)
• Professional Quality
• Twin Pump Quick Lift
• Safety Overload Valve
• Positive Action Uni-Joint Release Valve
• Min / Max Height: 76mm / 500mm
• Net Weight: 35.5kg

WARNING:
THIS JACK MUST BE USED ONLY ON HARD LEVEL SURFACES AND BE FREE TO ROLL DURING LIFTING AND LOWERING.
DO NOT GET UNDER A VEHICLE SUPPORTED BY A TROLLEY JACK – ALWAYS USE SUPPORT STANDS.

Approved to ANSI Standard: ASME PASE-2014
Model #: YLCD3S

*12 Month Limited Warranty against faulty materials and manufacture defects only*
Download Image
PE2024$449.90 Unit: 1

2.5T SEMI-ALLOY GARAGE JACK (CE)

With Nylon Non-marking Wheels | Min. 100mm / Max. 465mm

More info
PE2024 – 2.5T Semi-Aluminium Garage Jack
Professional Series aluminium/steel garage jack with a twin piston pump for a quick lift action. Features include a rubber pad which protects vehicle underside and nylon non-marking wheels for quieter movement. Lightweight aluminium/steel construction with a tough anodised finish. Safe & simple to operate twist lock / unlock valve.

• 2.5T Safe Working Capacity
• Low Profile
• Min/Max Height: 100mm / 465mm
• Nylon non-marking wheels
• Twin Pump (5.5 Strokes to Full Height)
• Handle Length: 1085mm
• Oil Capacity: 0.19 litres
• Dimensions: L603 x W305 x H230mm (without handle)
• Net Weight 25.6kg

Approved to CE 2006/42/EC Machinery Directive

WARNING:
THIS JACK MUST BE USED ONLY ON HARD LEVEL SURFACES AND BE FREE TO ROLL DURING LIFTING AND LOWERING.
DO NOT GET UNDER A VEHICLE SUPPORTED BY A TROLLEY JACK – ALWAYS USE APPROVED SUPPORT STANDS.

*12 Month Limited Warranty against faulty materials and manufacture defects only*
Download Image
PE9805$689.00 Unit: 1

ALUMINIUM ATV/MOTORCYCLE LIFT 680KG/1500LB CAP.

100 to 489mm (with saddle extension)

More info
PE9805 - Aluminium Hyraulic ATV/Motorcycle Lift
This low-profile 680kg / 1500lb capacity Hydraulic Motorcycle Lift is ideal for stabilising your motorcycle, ATV or UTV while you detail or make repairs. One hand operation, light weight aluminium construction.

Features:
• High strength, light weight aluminium construction
• Lift range 100mm to 432mm
• Saddle extensions add 57mm to lift height*
• 800mm extra long handle for easy lifting
• Locking safety bar
• Rubber grip pads
• 2 x swivel castors

Specifications:
• Minimum saddle height: 100mm
• Maximum saddle height: 432mm / *489mm
• Weight Capacity: 680kg / 1500lb
• Overall dimensions: 800 x 440 x 200mm
• N.W./G.W.: 23.5kg / 26kg

THIS JACK MUST BE USED ONLY ON HARD LEVEL SURFACES. DO NOT GET UNDER ANY VEHICLE, ATV OR MOTORCYCLE SUPPORTED BY A HYDRAULIC LIFT.

Approved to ANSI Standard: ASME PALD-2009

*12 Month Limited Warranty against faulty materials and manufacture defects only*